Cleaning for the buildings that keep a plant staffed
Denali cleans the workplaces at power generating stations: administration offices, control buildings, warehouses and spare parts stores, maintenance shops, locker rooms, break rooms and restrooms. These are the rooms operators, technicians and maintenance crews use every shift, and they take heavy wear from field soil and round-the-clock staffing.
The plant is the host and its rules come first. Your safety team decides which rooms our crews enter, when, with what escort and in what PPE, and the cleaning plan is written from that. Utility service centers, crew rooms and yards away from the plant are covered on our utility facility cleaning page.
California’s generating fleet in 2025
California’s total system electric generation in 2025 was 267,661 GWh, with 205,698 GWh generated in state and the rest imported, per the California Energy Commission’s 2025 Total System Electric Generation page. That page breaks in-state generation down by fuel:
| Fuel type | 2025 in-state generation (GWh) | Share |
|---|---|---|
| Natural gas | 74,316 | 36.13% |
| Solar | 55,528 | 26.99% |
| Large hydro | 24,125 | 11.73% |
| Nuclear | 17,575 | 8.54% |
| Wind | 15,171 | 7.38% |
| Geothermal | 10,908 | 5.30% |
| Biomass | 4,226 | 2.05% |
The same page counts 18,296 MW of battery storage statewide at the end of 2025. By our estimate from the CEC’s capacity database (data as of June 16, 2026), natural gas plants held about 43 percent of 2025 in-state installed capacity and solar about 27 percent. Gas plants, solar sites, hydro stations and storage facilities differ a great deal, yet every one has offices, shops and staff rooms that need cleaning.
What crews clean at a generating station
| Building or room | Routine work | Periodic work |
|---|---|---|
| Administration offices and conference rooms | Desks, touchpoints, carpet and hard floors, trash and recycling | Carpet extraction, window cleaning |
| Control building offices, kitchens and restrooms | Released rooms only, on the schedule your shift supervisor sets | Hard floor scrub and recoat |
| Warehouses and spare parts stores | Aisle sweeping, dock floors, waste points | Concrete scrubbing, high dusting of racking tops |
| Maintenance shops | Accessible floors swept, entrances kept clear of tracked soil | Degreasing scrub on shop concrete |
| Locker rooms, break rooms and restrooms | Disinfected and restocked each visit | Restroom and shower deep cleaning |
| Parking areas and walkways | Litter pickup and sweeping | Pressure washing of compatible surfaces |
Tools, parts, instruments and plant equipment stay with your people. Our crews clean floors and the surfaces your team identifies, and work stops in any area the moment your supervisor needs it back.
The host briefs the crew before work starts
OSHA’s power generation standard, 29 CFR 1910.269, calls the employer that runs the installation the host employer and an outside company working there the contract employer. Before work begins, the host tells the contractor about the installation’s characteristics and known hazards. The contractor passes that to its own crew, tells the host about any hazards its own work brings, and reports unexpected hazards it finds within 2 working days. The two coordinate their work rules.
Denali follows that process with the host. Crews take your site orientation, wear the PPE your rules call for, follow your sign-in rules, and report anything unusual to the person your safety team names. Whether 1910.269 reaches a plant’s office buildings is a question your own safety team answers, so the plan follows your rules for every building.
Signed doors, tagged equipment and permit spaces
Rooms with electric supply equipment are enclosed or guarded under 1910.269, carry warning signs, and stay closed to unqualified people while the equipment is energized. Only qualified employees may work near exposed energized parts. Denali’s crews clean the offices, shops and staff rooms around that equipment, and signed electrical rooms stay with your qualified staff.
Lockout and tagout follow the same pattern. Under OSHA’s lockout standard, 29 CFR 1910.147, a tag is a warning device that is never removed without authorization or ignored, and employees working where lockout is used are told never to restart locked-out or tagged equipment. The on-site and outside employers also tell each other about their lockout procedures. A tag on a machine in a shop means our crews clean around it and leave it exactly as found.
Permit-required confined spaces, such as tanks, vessels, vaults and pits with serious hazards, are posted with danger signs, and the host tells any contractor where they are. Those spaces stay off every cleaning route.
Escorted visits inside a security perimeter
Some plants and control centers hold cyber systems covered by NERC’s CIP-006 physical security standard. That standard binds the registered utility entity, not its cleaning contractor. It requires continuous escort for visitors without authorized unescorted access inside a physical security perimeter, and a visitor log with the date and time of first entry and last exit, the visitor’s name and the person responsible, kept at least ninety calendar days. CIP-006-7, adopted by NERC’s Board in May 2024, keeps those escort and logging requirements.
Rooms inside a perimeter go on the plan as escorted visits at times your escort can cover. Crews sign the log as your rules direct and finish the escorted rooms first, so your staff is not tied up longer than needed.
California and Nevada safety rules
In California, Cal/OSHA’s Title 8 High-Voltage Electrical Safety Orders treat more than 600 volts as high voltage and require employers sharing a high-voltage work site to exchange information about hazards and procedures before work starts. Title 8 also sets minimum clearances from energized overhead lines, starting at 6 feet for 600 to 50,000 volts, which shapes where exterior window poles, pressure washing wands and lifts are allowed near a switchyard fence.
Plants around Reno and Sparks fall under Nevada OSHA, which runs an OSHA-approved state plan with offices in Las Vegas and Reno and has adopted most federal OSHA standards by reference. The host plant’s own rules still decide where crews go on either side of the state line.
Fitting visits to shifts and planned outages
Control buildings and locker rooms run around the clock, so restrooms and break rooms are cleaned right after shift change, when the incoming crew has settled in. Offices follow an evening or weekday schedule, and night porters from our day and night porter services keep staff rooms in order on the overnight shift.
Heavier work, such as concrete scrubbing through industrial floor care or high dusting from lifts through ceiling and overhead cleaning, is set for planned outages or quiet weeks when your team releases the warehouse and shop floors. Parking areas and walkways can be refreshed with industrial pressure washing, with water use planned to protect nearby storm drains.
Denali serves generating stations and their support buildings around Sacramento, Rancho Cordova, Woodland, Tracy, Reno and Sparks. Our guide to industrial cleaning task lists shows how to set out each building’s tasks and frequencies.
Request a power plant cleaning quote
Tell us which buildings you want cleaned, the shift pattern, your orientation and escort rules and any outage dates coming up, and Denali will build a quote around them. Crews are background-checked, supervisors inspect each building, and a certificate of insurance is supplied for your contractor file. Request a quote to get started.
A few useful answers
Common questions
What should our safety team share with Denali before the first visit?
The site’s known hazards, the rooms crews may enter, escort and sign-in rules, required PPE and your orientation, so the crew starts on your rules.
Do cleaners go into electrical rooms or switchyards?
Those areas stay with your qualified staff. Denali crews clean the offices, control building staff rooms, shops, warehouses and locker rooms around them.
What happens when a cleaner finds a lockout tag in the shop?
The crew cleans around the tagged equipment, leaves the tag and lock untouched and keeps the area exactly as found.
Can concrete scrubbing and high dusting be timed to a planned outage?
Yes. Heavier floor and overhead work is booked for the outage window or quiet weeks your team releases.
Can a plant near Reno use the same plan as our California buildings?
Yes. One plan covers both, with Nevada OSHA applying in Nevada and each host site’s own rules deciding where crews go.
Resources

